“ASHRAE Guideline 36 is basically a high-performance sequence of operations for large buildings, such as large manufacturing plants, hospitals and hotels. The core concept is to have our load dictate what we do, not the other way around.” — Keith Earhart.
Chiller & Cooling Best Practices sat down with three of CIS’s officers, Mikel Bonano, Jr., CEO; Keith Earhart, Vice President, Engineered Sales and Strategic Accounts and Joseph Bonano, Louisiana Controls Manager; to discuss staying operational during extreme weather events, the benefits of two-stage centrifugal chiller impellers and a massive project CIS undertook for Tulane University.
FABTECH 2023, a leading event for metal forming, fabricating, welding, and finishing, successfully wrapped up its four-day run at Chicago's McCormick Place, achieving significant milestones for attendance, exhibitors, and show floor size. The 2023 show floor, spanning an impressive 825,325 square feet across three exhibit halls, featured an extensive showcase of over 1,500 world-class suppliers.
The 2022 International Production & Processing Expo (IPPE), was held January 25-27, 2022 in Atlanta with more than 500,000 square feet of exhibit space and 1,140-plus exhibitors. Attendee numbers had not been released when this was written. Sponsored by the U.S. Poultry & Egg Association, American Feed Industry Association and the North American Meat Institute, IPPE is the world's largest annual poultry, meat and animal food industry event of its kind.
The EXPO & Conference focuses on “Optimizing On-site Utilities Powering Automation.” Experts from all over the world convened to discuss compressed air, pneumatics, motors and drives, vacuum, aeration blower and chiller/cooling and water treatment systems.
Held November 2-4, 2021, this 3rd installment of the event continued to provide continuing education, certification and networking opportunities to equipment sales engineers, engineering firm and manufacturing plant personnel.
Our simplified business model is to melt plastic and cool it back into the form we want – and cooling water makes this happen. We need to optimize chilled water temperature and flow to ensure that our production machines make consistent finished products. In molding application, we cool the plastic through conduction and convection directly. Blown film is different in that cooling-water cools the air and then an air handler cools the plastic.
In February 2021, Chiller & Cooling Best Practices Magazine interviewed members of the Intertape Polymer Group Inc. (IPG) Sustainability Pillars team to gain an understanding of the work being done to improve energy efficiency. The team members interviewed were Michael Jones (Director of Corporate Energy), Michael Deitering (Senior Project Engineer), Jarrod Knapp (Maintenance Manager) and Mark Secord (Engineering Group Leader).
The NPE 2018 International Plastics Showcase was held at the Orange County Convention Center in Orlando, Florida, May 7-11. Setting all-time records, the Show attracted 2,180 exhibitors — including Chiller & Cooling Best Practices and Compressed Air Best Practices® Magazines! Over 1,200,000 square feet of exhibition space was used, breaking the all-time NPE record. Held once every three years, NPE 2018 registered attendance was 56,000.
Since 2002, Energy Trust of Oregon have saved and generated 728 average megawatts of electricity and 52 million annual therms of natural gas. This is enough energy to power Multnomah and Washington counties while heating Deschutes County homes. ETO has saved enough energy equal to the output of a power plant and reduced reliance on fossil fuels. In total, they have invested $1.5 billion to save customers more than $6.9 billion on their energy bills over time.
Chiller & Cooling Best Practices Magazine interviewed Paul Heston (General Manager) and Tom Strock (Chief Engineer) from Hydrothrift Corporation.
In a nutshell, where workers are exposed to harmful chemicals, they must have eyewash and safety shower stations to decontaminate themselves in the event of a spill or splash. A variety of industries, including petrochemical, chemical, metal fabrication and laboratories, must plan for this contingency. The ANSI Z358.1 Standard specifies the water used for these purposes must be tepid or within a site-specified range. This means in colder climates, water must be heated, and in hotter climates water must be cooled.
The CFO asks the Corporate Energy Manager, “The numbers for this energy efficiency project look too good to be true - $334,000 in annual energy savings requiring a $89,000 investment (after the energy rebate) with a simple ROI of just 3 months?” “How do we know the reduction in kWh usage, which the energy auditor has promised, will actually happen?” “Why don’t we just deploy this same capital into a production project where we have more experience and confidence in the expected ROI?”The recently hired Corporate Energy Engineer answers, “Those are the right questions to ask - we strongly believe in this opportunity for the following reasons.”
Chiller & Cooling Best Practices interviewed Keith Martin (Director Energy Efficiency) and Cheryl Miller (Energy Efficiency Advisor) from Ameren Illinois and Robert Baumgartner (Business Program Manager) from Leidos Engineering.
Seven years ago, a team of three of us at Ameren Illinois made the commitment to create and deliver a program that would make a difference. Today, the Ameren Illinois ActOnEnergy program is an award-winning energy efficiency program covering southern and central Illinois. After six program years, we are thrilled to report our business customers are saving over $132 million in annual energy costs due to energy efficiency measures they implemented with financial incentive assistance from ActOnEnergy.
Chiller & Cooling Best Practices interviewed Michael Jones, Corporate Energy Team Leader, from Intertape Polymer Group (IPG).
Intertape Polymer Group (IPG) is a manufacturer of tapes, films, woven fabrics, and complementary packaging systems for industrial and consumer use. The company operates 10 production plants and employs approximately 1,800 people. IPG has developed a robust energy management program by using ENERGY STAR energy management tools and actively participating in the ENERGY STAR partnership. IPG is receiving ENERGY STAR recognition for the growth of its energy program and leadership as a medium-sized manufacturer.
Industrial plants are major consumers of water. Water is used in many processes. Sustainability projects focus on reducing the consumption of water and the energy-costs associated with cooling water so it may be effectively used.
